| Ihe | Ike |
| nhazi ọkwa | Aluminom Base, ọla kọpa Base, Ígwè isi, ceramics isi ọla kọpa, jikọtara Bade Board |
| ihe | Ụlọ Aluminom, Ụlọ ọla kọpa, lmported aluminum, ọla kọpa lmported |
| ọgwụgwọ elu | HASL/ENIG/OSP/ọlaọcha |
| akaụntụ oyi akwa | bọọdụ e biri ebi nke otu akụkụ / akụkụ abụọ nwere akụkụ abụọ |
| maxi.board Nha | 1200mm * 480mm |
| Nha bọọdụ min | 5mm * 5mm |
| trace obosara/apsce | 0.1mm / 0.1mm |
| wap na ighikota | <=0.5% (ọkpụrụkpụ:1.6mm,Ogbe Size: 300mm*300mm) |
| osisi ọkpụrụkpụ | 0.5mm-5.0mm |
| ọla kọpa nzuzu ọkpụrụkpụ | 35um/70um/105um/140um/175um/210um /245um/280um/315um/350um |
| Nlekere ogo V-CUT | Ntugharị CNC: ± 0.1mm; Punch: ± 0.1mm |
| V-CUT ndebanye aha | ± 0.1mm |
| Oghere mgbidi ọla kọpa ọkpụrụkpụ | 20 - 35 nkeji |
| Min ndebanye aha nke oghere oghere (jikọta data CAD) | ± 3mil (± 0.076mm) |
| Min. oghere ịkụ ọkpọ | 1.0mm n'okpuru, 1.0mm (Board ọkpụrụkpụ n'okpuru 1.0mm, 1.0mm) |
| Min. ịkụ ọkpọ oghere square | 1.0mm n'okpuru, 1.0mm * 1.0mm (Ọkpụrụkpụ osisi n'okpuru 1.0mm, 1.0mm * 1.0mm) |
| Ndebanye aha nke sekit ebipụtara | ± 0.076mm |
| Dayameta oghere Min.drill | 0.6mm |
ọkpụrụkpụ ọgwụgwọ elu | ọla edo edo edo: Ni 4um-6um, Au0.1um-0.5um ENIG: Ni 5um-6um, Au: 0.0254um-0.127um ọlaọcha: Ag3um-8um HASL: 40um-100um |
| Nkwenye ogo V-CUT | ±5 (ogo) |
| V-CUT osisi ọkpụrụkpụ | 0.6mm-4.0mm |
| Min. Lefend obosara | 0.15mm |
| Min. Solder nkpuchi oghere | 0.35mm |